HYDPRO LP Classic Series drysuit inflator hose with quick-disconnect fitting

HYDPRO - LP Drysuit Inflator Hose Classic Series

Nitrox-ready / 8"
$32.00
Sale price  $32.00 Regular price 
Skip to product information
HYDPRO LP Classic Series drysuit inflator hose with quick-disconnect fitting

HYDPRO - LP Drysuit Inflator Hose Classic Series

$32.00
Sale price  $32.00 Regular price 
Hose OptionNitrox-ready
Size
Description

The HYDPRO LP Classic Series drysuit inflator hose brings the same high-quality Classic construction to your drysuit gas supply. Good flexibility, satin finish, and standout lightness and solidity in its category. The structural consistency means it holds its shape and resists kinking - critical when routing a drysuit hose through a harness or under a wing.

Enhanced layer-coadhesion provides solid mechanical integrity, while the micro-drilling system catches any leak early. Years of design refinement back every Classic hose with thorough testing and proven reliability.

Configuration

LP DSV: For dry suit valve - 3/8" male UNF + quick disconnects (larger ring)

Composition

  • Coating: Low-opacity polyurethane
  • Reinforcement: High-resistance aramid fibres
  • Inner hose: Polyurethane

Hose Option Details

Each variant ships with a specific hose option:

  • Nitrox-ready: Viton O-rings upgrade for compatibility with nitrox and enriched air mixes up to 40%.

Suggested Setups

  • Drysuit Inflation - 30" (75cm) LPI dry
  • Sidemount Left - 6" LPI dry, 9" LPI dry, 15" LPI dry
  • Sidemount Right - 9" LPI dry
  • GUE Doubles - 30" LPI dry, 32" LPI dry, 34" LPI dry
  • GUE Single - 32" LPI dry, 34" LPI dry

Specifications (per manufacturer)

  • Series: LP Classic
  • Type: Dry Suit Valve
  • Certification: UNI-EN 250:2014
  • Produced without solvent-based glues or adhesives
  • Over 160 lab tests performed per hose
  • Burst pressures exceed twice the mandated standard
  • Color: Black

Made in Italy.

Use Limitations & Product Notices
  • Do not use with gas mixes above 40% O2.
  • Inspect the micro-drilling leak indicator before every dive; replace immediately if any hole is weeping.
  • Use only if trained in drysuit diving.
  • Oxygen service: for mixes above 40% O2, use only oxygen-cleaned components assembled with O2-compatible procedures. Hydrocarbons or incompatible materials can cause fire or explosion.
IMPORTANT - LIFE-SUPPORT EQUIPMENT

Scuba diving and technical diving (including mixed-gas, decompression, cave, wreck, and rebreather diving) are inherently hazardous activities that can result in serious injury or death. Products sold by Rugged Scuba are components of, or accessories to, life-support equipment. By purchasing any such product, you expressly acknowledge and assume all risks associated with its use.

Training required

Use only if you are currently certified for the type of diving and equipment configuration in which the product will be used. Do not use beyond the limits of your training, experience, or physical fitness.

Inspection and service

Inspect every product before every dive. Do not use if damaged, corroded, leaking, out of test, or otherwise suspect. Service and replacement must be performed in accordance with the manufacturer's instructions and by personnel qualified for the specific equipment. Rugged Scuba does not service regulators, rebreathers, or other life-support components, and does not certify third-party service.

Compatibility

You are responsible for verifying that every product is compatible with your specific regulator, cylinder, valve, rebreather, and gas mix before use. If unsure, consult a qualified scuba technician.

Aftermarket accessories

Certain Rugged Scuba products are aftermarket accessories for equipment manufactured by third parties (including but not limited to JJ-CCR, Fathom Dive Systems, iQsub, Halcyon, and Light Monkey). Those products are not manufactured, endorsed, or authorized by those OEMs; all trademarks are property of their respective owners and are used only for compatibility identification. Use of any aftermarket accessory may affect your OEM warranty.

Disclaimer of implied warranties

TO THE FULLEST EXTENT PERMITTED BY APPLICABLE LAW, RUGGED SCUBA DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.

Limitation of liability

TO THE FULLEST EXTENT PERMITTED BY APPLICABLE LAW, RUGGED SCUBA’S TOTAL AGGREGATE LIABILITY ARISING OUT OF OR RELATING TO ANY PRODUCT OR ITS USE SHALL NOT EXCEED THE PURCHASE PRICE PAID FOR THAT PRODUCT. RUGGED SCUBA SHALL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, EXEMPLARY, OR PUNITIVE DAMAGES, INCLUDING WITHOUT LIMITATION PERSONAL INJURY, DEATH, LOSS OF USE, OR LOSS OF DATA, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

Indemnification

You agree to indemnify, defend, and hold harmless Rugged Scuba, its owners, officers, employees, and suppliers from and against any and all claims, losses, damages, liabilities, costs, and expenses (including reasonable attorneys’ fees) arising from or relating to your use, misuse, or modification of any product, your breach of these terms, or your breach of any applicable law or regulation.

Governing law

These terms are governed by the laws of the State of California, USA, without regard to conflict-of-laws principles. Any dispute arising under these terms or relating to any product shall be brought exclusively in the state or federal courts located in Los Angeles, California, and you consent to personal jurisdiction there.

Proposition 65

California residents: see each product page for product-specific Proposition 65 warnings where applicable.

You may also like

Fast shipping

Most orders ship within 1 business day.

Exclusive products

Purpose-built and carefully curated dive gear.

Small business

Owned and operated by divers.